RESUMO A construção de grandes blocos de fundação para edifícios altos tem se tornado comum no país. As altas resistências à compressão dos concretos, aliado ao fato de muitas vezes se tratar de concretos autoadensáveis, geralmente levam à elevados consumos de ligante, possivelmente originando problemas de origem térmica a estes elementos estruturais. Este estudo teve como objetivo avaliar a influência de diferentes adições minerais na elevação da temperatura de concretos massa com elevada resistência à compressão. Para isso, foi utilizado um calorímetro adiabático, o qual simula a condição de um concreto em um regime de cura autógena. As resistências à compressão dos concretos nos regimes de cura autógena e ambiente foram determinadas aos 28 dias. Complementarmente, as pastas que compõem os concretos foram avaliadas através de análise termogravimétrica aos 28 dias, a fim de verificar a influência da temperatura nas reações dos compostos das misturas. Os resultados mostraram que houve uma tendência de menor liberação de calor para os parâmetros °C/MPa e °C/Kg de ligante para o CP III – RS, em relação aos demais ligantes utilizados. A análise termogravimétrica indicou que o tipo de cura não influenciou significativamente na atividade pozolânica e na hidratação do cimento Portland. Por fim, verificou-se que as maiores resistências à compressão para uma mesma relação água/ligante foram obtidas pela combinação de CP V – ARI + metacaulim, pelo fato desta adição mineral apresentar elevada atividade pozolânica. Já na combinação CP V – ARI + sílica ativa, a adição mineral parece ter contribuído de forma predominante pela formação de pontos de nucleação, apresentando pouco consumo de hidróxido de cálcio.
ABSTRACT The construction of large foundation blocks for tall buildings has become common in the country. The high compressive strength of concretes, coupled with the fact that they are often self-compacting concretes, generally lead to high binder consumption, possibly causing problems of thermal origin to these structural elements. The objective of this study was to evaluate the influence of different mineral admixtures on the temperature rise of mass concrete with high compressive strength. For this, an adiabatic calorimeter was used, which simulates the condition of a concrete in an autogenous cure regime. The compressive strengths of the concretes in autogenous and ambient cure regimes were determined at 28 days. In addition, the pastes that composed the concretes were evaluated by thermogravimetric analysis at 28 days, in order to verify the influence of temperature on the reactions of the compounds of the mixtures. The results showed that there was a trend of lower heat release for the parameters °C/MPa and °C/kg of binder for CP III-RS, compared to the other binders used. Thermogravimetric analysis indicated that the type of curing did not significantly influence the pozzolanic activity and the hydration of the Portland cement. Finally, it was verified that the higher compressive strengths for the same water/binder ratio were obtained by the combination of CP V-ARI + metacaulim, because this mineral addition showed high pozzolanic activity. On the other hand, in the CP V - ARI + active silica combination, the mineral admixtures seems to have contributed predominantly to the formation of nucleation points, presenting low calcium hydroxide consumption.